Skip to main content
Kofax

Convert Standalone VRS on a KFS Scan Station Into a Client to Pull Licensing from Capture License Server

Article # 3048753 - Page views: 48

Issue:

How to convert a Standalone Kofax VRS 5.1.2 or 5.2 installation on a Kofax Front Office Server (KFS) scan station into a Client installation so that it pulls its licensing from the Kofax Capture License Server.

Solution:

Important-Icon.png

The procedure documented in this article has not undergone certification testing and is considered to be an unofficial workaround.  It should be thoroughly tested in a lower environment before being implemented in a production environment.

product_documentation_-_user_guides_Important-Icon.png

The procedure documented in this article is applicable only when the KFS scan station is located in the same LAN or WAN as the Kofax Capture License Server.  The scan station must be able to successfully communicate with the Kofax Capture License Server on port 2424.

To convert the standalone installation of Kofax VRS into a Client and point it to the Kofax Capture License Server:

  1. Make sure that the scan station is able to communicate with the Kofax Capture license server on port 2424
     
  2. Stop the WebCapture Service to ensure that Kofax VRS is not still loaded
     
  3. Navigate to
    C:\ProgramData\Kofax\Vrs
     
  4. Create a new text file called SALConfig.xml
     
  5. Open SALConfig.xmlin a text editor such as Notepad
     
  6. Enter the following into SALConfig.xml, replacing mylicenseserver.mycompany.com with the hostname, IP Address or Fully Qualified Domain Name of the Kofax Capture license server.
    <licensing>
      <servers>
          <server port="2424" isEnterprise="False">mylicenseserver.mycompany.com</server>
       <servers>
    <opts>
          <delaySeconds>30</delaySeconds>
          <totalTimeoutSeconds>300</totalTimeoutSeconds>
          <useDefaultWebProxy>False</useDefaultWebProxy>
          <remoteSite>False</remoteSite>
       </opts>
    </licensing>
    

     
  7. Save the changes to SALConfig.xmland close the file
     
  8. Open KofaxReg.xml in a text editor such as Notepad.
     
  9. Locate the INSTALLTYPE and ORIGINALINSTALLTYPE values under Registry | HKEY_LOCAL_MACHINE | SOFTWARE | KOFAX | VIRTUALRESCAN
    <Registry>
       <HKEY_LOCAL_MACHINE>
          <SOFTWARE>
             <KOFAX>
                <VIRTAULRESCAN>
                ...
                   <INSTALLTYPE Value="Standalone" />
                   <ORIGINALINSTALLTYPE Value="Standalone" />
                </VIRTUALRESCAN>
    

     
  10. Change the INSTALLTYPE and the ORIGINALINSTALLTYPE values to Workstation
    <Registry>
       <HKEY_LOCAL_MACHINE>
          <SOFTWARE>
             <KOFAX>
                <VIRTAULRESCAN>
                ...
                   <INSTALLTYPE Value="Workstation" />
                   <ORIGINALINSTALLTYPE Value="Workstation" />
                </VIRTUALRESCAN>

     

  11. Save the changes to KofaxReg.xml
     
  12. Restart the WebCapture Service
     

Level of Complexity 

Moderate

 

Applies to  

Product Version Build Environment Hardware
Kofax VRS 5.2
5.1.2
ALL KFS Scan Station N/A
Kofax Front Office Server 4.3
4.1
ALL Scan Station N/A
Kofax Capture 11.1
11.0
ALL Server N/A

References

N/A

 

 

Article # 3048753
  • Was this article helpful?