QAID # 15831 Published
Question / Problem:
Can I install VRS 4.5 with Kofax Capture 10 or 11?
Answer / Solution:
Yes. Kofax Capture 10.x and 11 are supported with both Kofax VRS 5.x Elite and VRS 4.5.1 (SP 1). Please see the Kofax Cross Compatibility Matrix for additional details on configurations for Kofax Capture 10.x and 11.0.
Note: It is not recommended to install Kofax Capture 10.x or 11.0 before VRS 4.5.1 (SP 1). If you have already installed Kofax Capture 10.x or 11.0, we strongly recommend that you first uninstall Kofax Capture and then follow the installation instructions by installing VRS 4.5.1 (SP 1) before reinstalling Kofax Capture 10.x or 11.0.
Install VRS 4.5.1 (SP 1)
Once the VRS 4.5.1 (SP 1) product is installed, it is recommended to test scanning in the VRS Test Application/VCDemo before continuing with the Kofax Capture 10 installation to verify that VRS 4.5.5 (SP 1) is installed properly.
Kofax Capture can now be installed using the /NoVRS switch
To install using the No/VRS switch, open the Run window and enter the path to the
Setup.exefile (encompassed by quotation marks) followed by the /NoVRS switch.
From the folder where you extracted the downloaded Kofax Capture 10.0 ISO (Where <PATH> is the location where the ISO contents were extracted):
“<PATH>\Kofax Capture\setup.exe” /NoVRS
From Kofax Capture 10.0 Server location (where <Server>is the network server path):
If Kofax Capture was originally installed using the /NoVRS switch before VRS 4.5.1 (SP 1) was installed:
- Add the following Key to the Windows Registry:
HKLM\Software\Kofax Image Products\VirtualReScan
- Add a new String Value named InstallDirectory with the Value of:
- Capture can now be installed using the /NoVRS switch.