Skip to main content
Kofax

Removing DMS Connectors from the "Connections" menu.

Removing DMS Connectors from the "Connections" menu.

 

Information:

There are different methods for removing document management systems (DMS) from the "Connections" menu in eCopy PDF Pro Office 6.1.

Method #1: Removing DMS Connectors when installing eCopy PDF Pro Office 6.1.

When installing eCopy PDF Pro Office 6.1 via a network installation the DMS connectors can be disabled by adding the installation parameter ISINSTALLDMS="" to the install script.

Note: This method #1 will remove all DMS connection integration.

Method #2: Removing DMS through the user interface.

  1. Open eCopy PDF Pro Office 6.1.
  2. Click "Edit> Preferences > Document management Systems".
  3. Uncheck the desired DMS integration checkbox.
  4. Restart eCopy PDF Pro Office 6.1.

Method #3: Removing DMS connectors from Windows registry.

  1. Close all open applications.
  2. Click "Start > Run" and type regedit in the run field and click "OK".
  3. Browse the registry for "HKEY_CURRENT_USER\Software\ScanSoft\Pdf Professional 8.0\DMSGeneral".
  4. Open the corresponding DWORD value of the connector that is desired to be disabled and change the Value Data to 0. (0 = Off; 1 = On) (Example: Value name = UseDropBox Value Data = 0)
  5. Restart eCopy PDF Pro Office 6.1.

Notes:

There may be more DMS connectors that show within the user interface which do not show up in the locations discussed in the above methods, these can also be disabled. There also may be a desire to disable the DMS connectors in a semi-permanent manner. Use method #3 below to accomplish disabling the DMS connectorメs semi-permanently and to disable connectors that may not show up in method #1 and #2.

Method #4: Removing DMS connectors by renaming associated .DLL files.

  1. Close eCopy PDF Pro Office 6.1.
  2. Browse to the locations listed below depending on the Windows bit version. Windows 64 bit: "C:\Program Files (x86)\Nuance\eCopy PDF Pro Office 6\bin\Connectors" Windows 32 bit: "C:\Program Files\Nuance\eCopy PDF Pro Office 6\bin\Connectors"
  3. Located the corresponding *.dll file for the DMS connector and rename the file extension from *.dll to *.old. (Example: Rename "DropboxConnector.dll" to "DropboxConnector.old".
  4. Launch eCopy PDF Pro Office 6.1.
  • Was this article helpful?