Skip to main content
Kofax

MarkView Scan - Kodak 35xx Scanner Calibration Instructions

Summary

3735

Applies To

  • ERP System: All
  • MarkView Version: All

Resolution

If you are calibrating immediately after turning the scanner on….

  1. Turn the scanner on
  2. Wait 3 minutes for the scanner to warm-up.
  3. Change the feeder tray for landscape.
  4. Insert a piece of white paper into the tray.
  5. Press and hold down the Red button for 15 seconds and then press the Green button (while holding down the Red) and release.
  6. The paper is scanned through and the calibration is complete.

If the scanner has been in use…

  1. Change the feeder tray for landscape.
  2. Insert a piece of white paper into the tray.
  3. Click and hold down the Red button for 15 seconds and then press the Green button (while holding down the Red) and release.
  4. The paper is scanned through and the calibration is complete.
Note: Calibrate the scanner at least twice a week for optimal imaging performance.

Keywords: calibrate