Skip to main content
Kofax

Test Connection to KTA Not Working During Installation

Article # 3026906 - Page views: 3

Issue

During installation of APA 2.3, the test connection to KTA is not working when using Windows Authentication or the account name being tested.

The user can select Windows Authentication for connection with the database without issue, but for connection to the KTA instance, Windows Authentication, and all three accounts (Trainee, Admin, KTAService) cannot run the installer and connect to the KTA instance through the install media.

Solution

One option is to use the session id when running the installer. To confirm the system session id, go to KTA Designer >System >System settings >Logon and authentication >User sessions. This session id is only used to run the installer - it won't be needed to login for example. 

 

The second option is to confirm which user is logged into the machine itself as the administrator. Confirm the user logged into KTA Designer. Example: Administrator vs. Trainee. 

In KTA Designer, under Resources >Individuals >General - you can see the Username field value. Example: 'DEV\Administrator'. If this is 'DEV\Administrator' here, then use this exact value when running the installer, entering <machine>\<user> using the username/password method (instead of Windows Authentication). 

 

 

Level of Complexity 

Moderate. 

 

Applies to  

Product Version Build Environment Hardware
AP Agility 2.3.0.x      

References

Add any references to other internal or external articles

  • Was this article helpful?