Skip to main content
Kofax

Direct eFLOW Client to another eFLOW Server

Article # 3039121 - Page views: 28

Question / Problem: 

Sometimes an eFLOW Client needs to be directed to another eFLOW Server, which has the same eFLOW Version. This article describes how to do that.

Please note, that pathes in this article might not match your installation pathes. 

Answer / Solution: 

Every eFLOW Client has three configuration files to change in order to switch to another eFLOW Server:

C:\Program Files (x86)\TIS\eFlow 6\Bin\ConfigSources\TISconfiguration.config

C:\Program Files (x86)\TIS\eFlow 6\Bin\ConfigSources\ClientSection.config

C:\Program Files (x86)\TIS\eFlow 6\Bin\ConfigSources\BindingSection.config

In all files you will need to change the name\IP Adress of the eFLOW Server you want to connect to. 

Go to folder C:\ProgramData\TIS\eFlow 6\AppData\Client and remove all subfolders.

Important:

  • Please make sure you closed all stations and stopped the TIS AutoRunStarter Service on the Client, before editing and saving the files. 
  • Please make sure you made backups of all changed folders and files

 

Applies to:  

Product Version
eFLOW 6.x
eFLOW 5.x

 

Article # 3039121
  • Was this article helpful?