What are the recommendations for barcode print quality used in Kofax Transformation Modules?
Barcode recognition quality depends on barcode print quality and settings used in the document scanning process. In order for the barcodes to be recognized well, follow these recommendations:
A barcode must be separated from other text by a fairly wide white gap.
Barcode size and the width of its separate bars or dots must meet the following requirements:
- The optimal barcode height is more than 10 millimeters. The size of a barcode should be less than size A4
- Barcode height must be higher than the double height of a text line
- For not-square barcodes, their length must be bigger than their height
- For 1D barcodes, the width of the thinnest bar in the barcode must be at least 3-5 pixels in terms of pixels of the image
- For 2D barcodes, the dimensions of their cells should be at least 2x2 pixels, the recommended size is 4x4 pixels or more.
Besides, for all 2D barcodes except PDF417, the cells should be square, because barcodes with the prolate cells most likely will be recognized incorrectly
We do not recommended compressing images of barcodes using JPEG compression as it makes barcode borders fuzzy.
We do not recommended skewing barcodes, i.e. an angle of the barcode should be a multiple of 90 degrees relative to the horizontal axis.
The grayscale scanning mode is the best for OCR purposes. When scanning in black-and-white, adjust the brightness setting. If the barcode is “torn” or very light, lower the brightness to make the image darker. If the barcode is distorted or its parts are glued together, increase the brightness to make the image brighter.
Avoid printing barcodes in frames.
Avoid printing barcodes over a text or a picture.
In real life, barcodes which do not fit these recommendations can still be recognized, however the quality of recognition may be poor.
Level of Complexity
Add any references to other internal or external articles