Skip to main content
Kofax

Error when opening KTM Validation module - Could not create file - ServerName-CaptureSV-Images-00000617-Folderxfd

Article # 3036832 - Page views: 477

Issue

Attempting to open the KTM Validation module, I receive an error message similar to the following:

Could not create file: \\<Server_Name>\CaptureSV\Images\00000617\Folder.xfd

The module then "crashes."

 

Solution

Although Support wasn't able to reproduce this problem, a customer found that disabling SMB 2.0 on the Kofax server that hosts the CaptureSV share could solve this problem.

To disable SMB 2.0 on a Windows Vista or Windows Server 2008 system that is acting as the "server" system (hosting the network resources), a Registry modification is required:

  • Navigate to the HKLM\System\CurrentControlSet\Services\LanmanServer\Parameters Key. If there is no REG_DWORD value named Smb2, you will need to create it. This value does not exist by default. Once the value is created, set the value to 0 to disable SMB 2.0 (or 1 to enable SMB 2.0). Reboot the server afterwards.

More background information can be found at: Ask the Performance team Blog ¦ Two Minute Drill: Overview of SMB 2.0.

 

Level of Complexity 

Easy

 

Applies to  

Product Version Build Environment Hardware
Kofax Transformation Modules

6.3

6.4

     

References

14275, 304756