Skip to main content
Kofax

Install Kofax Export Connector for Express where Capture is also installed

3022852
3022852

Question / Problem: 

How to install a Kofax Export Connector for use only with Kofax Express on a system where Kofax Express and Kofax Capture are both installed.

Answer / Solution: 

Many Kofax Export Connectors are supported for use with both Kofax Capture and Kofax Express.  Installing Kofax Capture and Kofax Express on the same PC is an officially supported configuration.  Therefore, the need may arise to install a Kofax Export Connector on a machine where both Express and Capture are installed.  The InstallExportConnector.exe utility must be used to install a Kofax Export Connector if the export connector is to be installed for exclusive use by Kofax Express. 

 

To install a Kofax Export Connector for use only with Kofax Express:

  1. Close Kofax Express and all Kofax Capture modules and services.
     
  2. Open a Command Prompt "as administrator"
     
  3. Navigate to the bin folder where Kofax Express is installed.
    Example:
    cd "C:\Program Files (x86)\Kofax\Kofax Express\bin"
     
  4. Execute the following command where <path and executable> is the complete path to the Kofax Export Connector installer executable:
    InstallExportConnector.exe <path and executable>
    Example:
    InstallExportConnector.exe "c:\MyExportConnector\setup.exe"

 

Applies to:  

Product Version
EXPRESS 3.2

 

 

  • Was this article helpful?