Kofax VRS
- Administration Console
- Articles pertaining to the Kofax VRS Administraiton Console, including the Preferences, Exceptions, and About tabs.
- AIPE Features
- Articles pertaining to the AIPE feature set: Annotation, Endorsing/Imprinting, Black Border Removal, Deshade, Deskew, Despeckle, Form Recognition, Image Filtering, Line Removal, and Streak Removal
- Annotation appears on Front Side images only
- Annotation Requires Imprinter in VRS 5.1.x
- Imprinter Controlled by VRS
- Imprinter is off paper Error 20235 when scanning with endorsing enabled using an HP Scanjet N9120 scanner
- Imprinter settings in scanner driver overwritten by imprinter settings defined in Kofax Capture batch class settings
- Left Offset Value Does Not Change the Position of the Imprinting on the Page
- Percent 07S not saved at end of Imprinter Prefix String in Kodak i640 driver
- Bar Codes
- 1D Bar Codes successfully read from black and white images but not from color or grayscale images
- Bar codes created using the Free 3 of 9 Barcode Font in Microsoft Word not successfully read by the Standard Bar Code or Enhanced Bar Code engines
- Bar Codes Not Read from Imported PDF Files
- Bar Code Recognition Testing using VCDemo
- Bar code Size Quality and Placement Requirements for the Standard Bar Code engine
- Bar code Size Requirements for the Enhanced Bar Code engine
- Bar Code Specification Documentation per Bar Code Type
- Checksum value not returned when using Enhanced Bar Code engine to read barcodes that contain checksum value
- Code 128 Bar Code Results Include FNC1 Character
- Code 39 Bar Code Character Support
- Data Matrix ECC200 rectangular bar code recognition rate improvment with the Enhanced Bar Code engine
- Disable Extended 3 of 9 Bar Code Support in Kofax VRS
- EBC Not Available when scanning using Desktop level scanner with Workgroup or Production VRS License on Capture License
- Encode Bar Code Results using an Alternate Character Set
- Hole Fill damages bar codes near the edge of the page making them unreadable
- Kofax Crypto Test Tool to determine if Microsoft Cryptography issue is source of Host Processor Exception
- Quiet Zone Enforcement with 1D Bar Codes
- Standard Bar Code Engine Description
- Supported Bar Code types
- Drivers
- Bad Handle error when using a Kodak i600 TWAIN driver on a 64-bit Windows 7 OS with VRS Multicore Processing enabled
- Cannot locate SCSI device Error 20391 when loading a Canon DR-3080CII in VRS 4.5 on Windows 7 64-bit
- Canon DR-3080CII takes several minutes to load and begin scanning with VRS 4.x
- Canon DR-3080Cll takes several minutes to load in Kofax VRS 5.0 and 5.1
- Download Fujitsu fi Series Scanner Drivers
- Epson Workforce DS-530 ISIS driver installed but not Recognized by VRS
- Epson WorkForce DS-860 ISIS Driver Installed but not Recognized by VRS
- Error 48 Error loading DLL when connecting to a Hardware VRS scan source
- Error occurred while scanning or importing when loading Fujitsu fi-5950 ISIS with SVRS in Scan Module
- Fujitsu fi-6800 or fi-5950 ISIS Multifeed Detection causes Scan Application Crash
- Image Cut Off when scanning with Kodak TWAIN driver
- ISIS and or TWAIN Scanner Driver Downloads for VRS Certified Scanners
- ISIS Scanner Driver Test Program - TestAppN
- Out of Memory Error 7 when scanning in Color at Maximum page size and 400 DPI using a Fujitsu fi-7x60 or fi-7x80
- Peripheral mechanical malfunction error when scanning in VRS Test Console VCDemo or Kofax Capture Scan module
- Unknown ISIS Error 20393
- Unknown ISIS Error after installing Fujitsu fi-7x60 fi-7x80 PaperStreamIP drivers with Kofax VRS 5.1
- Environment
- Articles pertaining to Compatibility, System Configuration, and other issues arising from the Environment in which Kofax VRS is installed.
- Bad Filename or Number Error 52 exporting TIF files to a network location
- Best Practices for Configuring Kofax VRS Exclusions from Scanning by 3rd Party Security Software
- Cannot open file Error 20143 after first page scanned when testing the VRS scan source
- Disable User Account Control
- Display text in another language
- Error loading DLL Unknown Reason when loading a VRS 5.1.1 scan source in Kofax Capture
- FIPS Compatiblity with Kofax VRS 5.1
- Get registry entry failed error loading scan source or file import source
- Permissions on a Windows 7 - 10 system for Kofax VRS
- Scanning Support in a Citrix environment
- Windows Auditing to Monitor File or Folder Changes
- Image Import
- 20007 Cannot recognize file format error when trying to import a TIFF image
- 32-bit Color Image Import or Processing Support
- Bad Filename or Number Importing a 24-bit color TIFF image using VRS 4.5
- Cannot Recognize File Format error when importing TIFF files
- CMYK Color Support in Kofax VRS and Kofax Express
- Error 147 Unsupported bits per sample when importing a color TIFF image with VRS 5.x
- Importing JPEG compressed TIFF images into Kofax Capture 9 with VRS 4.5 fails.
- Maximum Image Size Dimensions
- Minimum Image Resolution Supported by VRS for Software Import
- Minimum Image Size Supported by VRS for Software Import
- Path and Filename Character Limit
- TIFF Compression Support
- Install/Uninstall
- Administration Console About Screen reports the version as Kofax VRS 4.5 Elite when Kofax VRS 5.x is installed with Kofax Capture 10.x or 11.x
- Cannot verify your Machine ID error 100 during Kofax VRS 5.1 upgrade installation
- CGA driver Digital Signature error when installing VRS 5.1 on Windows 10
- Completely Uninstall VRS 4.5
- Component Running error when installing VRS 5.2 Fix Pack
- Component Running error when performing VRS 5.2 Repair Install
- Context Value Required for Computation Not Set error when attempting to load a VRS scan source in VCDemo with VRS 4.5.1
- Context value required for computation not set error when loading a VRS scan source in VCDemo with Kofax VRS 5.x
- Context value required for computation not set error when opening the Kofax Capture 9.0 Scan module with Kofax VRS 4.5 installed
- Differences between the Setup.exe VRSInstall.bat and VRSServerInstall.bat files in the Kofax VRS 5.0 - 5.1.1 Elite installation media
- Error 9075 Reserve failed with Kofax VRS 5.x Elite if a VRS 4.5 ISIS Component Installer is installed
- The feature you are trying to use is on a network resource that is unavailable
- Install and Configure VRS 5.1 or 5.1.1 on a KTA 7.x workstation to pull VRS licensing from the KTA license
- Install Canon OEM VRS 5.1.1.12.0.2082 with Kofax Capture 11.0 - Best Practices
- Install HP OEM VRS 5.1.1.10.0.2017 with Kofax Capture 11.0 - Best Practices
- Install Kodak OEM VRS 5.1.1.13.0.2092 with Kofax Capture 11.0 - Best Practices
- Install Kofax VRS 5.1.2 on a KTA 7.x Workstation to pull VRS licensing from the KTA license
- Install Kofax VRS 5.2 on a KTA 7.x Workstation to pull VRS licensing from the KTA license
- IPSnooper Cleanup Utility
- Kofax VRS 5.1 Supported Operating Systems
- Kofax VRS 5.x Standalone Installation Support on KTA 7.x server
- Kofax VRS 5.1 installation fails with Error Code 1603 and VRSInstaller log reports error code 11
- Locate Kofax VRS.msi File from Standalone Installation
- Prerequisites for installing Kofax VRS 5.1 and 5.1.1
- SC007 Unable to make file copy error when attempting to upgrade from Kofax VRS version 4.2 to version 4.5
- Service Pack 1 for VRS 4.5 is not removed from Programs and Features after uninstalling VRS 4.5
- Silently Install VRS 5.x as a Standalone Installation
- Uninstall Kofax VRS 4.5 when not listed in Programs and Features
- Uninstall Kofax VRS when not listed in Programs and Features
- Uninstall Kofax VRS Using WMIC Command
- Uninstall VRS 5.1.1 Fix Pack Manually
- Uninstall VRS 5.1.1 Silently
- Uninstall VRS 5.1.2 Fix Pack Manually
- Uninstall VRS 5.1.2 Silently
- Uninstall VRS 5.1 when not listed in Programs and Features
- Uninstall VRS 5.2 Fix Pack Manually
- Uninstall VRS 5.2 Silently
- Upgrade Procedure from VRS 4.x to Kofax VRS 5.x
- Upgrade Procedure to Kofax VRS 5.1.1 on an existing Kofax Capture 9.0 or 10.0 workstation to avoid any potential licensing issues
- Windows Security prompts to install Hardware VRS scanner device software while installing Kofax VRS 5.1.x
- Kofax VRS Test Application - VCDemo
- Change Image File Name and Storage Location in VCDemo
- Change Image File Type and Compression in VCDemo
- Error 20197 Reserve Failed when loading a VRS scan source in VCDemo while AIPE and ISIS scan sources load without errors
- Please wait while Windows configures Kofax VirtualReScan when launching VCDemo with VRS 4.x
- Saving Multipage TIFF images in VCDemo
- Unhandled error in kprntctl.cpp at line 410 when loading VCDemo
- VRS Test Application aka VCDemo
- VRS Test Application VCDemo available in Kofax VRS 5.x
- Licensing
- Activate a Standalone Kofax VRS 5.x Elite Software License
- Activate a VRS 4.x license on a PC with multiple Network Interface Controllers NICs
- Activating PF-UPRO-XXXX license fails
- Automatic License Deactivation during Kofax VRS 5.x Uninstall
- A license for this serial number is in use on another machine error when activating a Kofax VRS 5.x Elite standalone software license in a new installation of Kofax VRS 5.x
- configuration and licensing question for connected workstation without KCN
- Deactivate a VRS 4.x license for use on another machine
- Deactivate a VRS Elite License for use on another machine
- Deactivate a VRS Elite license without an Internet connection
- Email Address Verification email is never received during Kofax VRS 5.x Elite License Activation
- Find VRS License Level for Scanner
- Grace Period in Kofax VRS Elite if a license is not activated
- Hardware Key Not Detected or Incorrect Type error when attempting to scan using Kofax VRS 4.x
- Identify the Machine ID of a remote VRS 4.x station
- License Levels - Kofax VRS 4.x
- License Levels - Kofax VRS 5.x Elite
- License level does not match previous license level error when upgrading the Canon OEM VRS 4.x software to VRS 5.x Elite with an Upgrade license
- License Level Exceeded error when using a Desktop-level scanner with a Desktop-level VRS Elite license
- License Level Exceeded The Canon DR-9080C scanner requires a Production VRS License error when loading a Canon DR-6080C or DR-7580C scan source
- Long Machine ID format in the VRS 4.x License Activation Utility
- Lost VRS license information retrieval
- Machine ID not populating prevents license activation
- Manually Activate a Kofax VRS Elite license
- Manual license deactivation and activation on same machine
- Move a VRS Server license to another server
- Need to move VRS license to another PC, Cannot connect to license server
- New license code required
- Proxy Requirements to allow VRS License Activation
- Reassociate VRS License
- RMA process does not apply to Parallel Port to USB dongle replacement
- Specified license information is invalid error when activating a Kofax VRS 5.x Elite license
- Specified License Information is Invalid error when activating a VRS 4.x Professional license in VRS 5.x
- Standalone Software License Active on One Machine at a Time
- Valid license to operate VRS could not be found or VRS is installed in demo mode Images will be stamped with the Kofax logo error when loading a VRS scan source
- VRS 100 VRS cannot verify your Machine ID error when loading a Kofax VRS 4.5 scan source
- VRS 5.x Elite License Upgrade Paths for Kofax Capture Customers
- VRS Elite license line item decremented from the Kofax Capture License when an OEM VRS 5.x Professional license is already installed
- VRS Elite license line item is not decremented from the Kofax Capture license after installing Kofax VRS 5.1.1
- VRS is unable to contact license server
- License Level Exceeded Scanner requires a Workgroup license error when loading a Fujitsu Desktop level fi-7000 series scanner in a third party scanning application
- Multicore Processing
- Error 9902 Write license level to bag failed Status 16 when scanning with a Kodak i600 TWAIN source
- Error 9905 An unhandled exception was raised in the VRS Server ToolkitException when scanning in the Kofax Capture Scan Module
- Manually Disable Multicore Processing when it is grayed out in the VRS Administration Console
- PDF Import
- Error 20010 Compressed Data error when importing a PDF in Kofax VRS 4.5
- File Already Open error when importing certain PDF files in Kofax Capture Scan module with Kofax VRS 4.5
- File Size Increase converting PDF files to TIFF image files
- Import PDF Files as 300dpi TIFF Images
- Inverted output image when importing a PDF into VRS 5.0 Elite without Service Pack 1
- PDF Version and Format Support for Import
- Profiles
- Articles pertaining to VRS Profiles, Scanner Profiles, and the Auto Profile feature.
- Backup VRS profiles in Kofax VRS 4.5 and 5.x
- Back side page showing black with VRS
- Create VRS Profiles - Best Practices
- KTA Scan VRS Profile Select does not load Matching VRS Profile prior to scanning
- No Scanner Profiles appear in the Kofax Capture Scanner Profile list
- Profile Sharing in Kofax VRS 5.x Elite
- Reserve Failed error when scanning using a Fujitsu fi-5900C scanner
- Restrict Users from modifying or saving new VRS Profiles
- SC007 Unable to make file copy error when loading a scan source in Kofax Capture Scan Module
- Scanner Profiles and VRS Profiles are Scanner Model Specific
- Scan Settings for Page Size Page Layout Color Mode DPI or Simplex Duplex not saved in the VRS Profile
- Unable to download shared profiles and training data from the VRS server error when loading a Kofax VRS Scan Source in a third-party TWAIN-based application
- Scanner
- Capture original grayscale or color images from the scanner before VRS processing
- Command failed Check log error 4769 when loading a Kodak i600 series scan source after installing the Kofax VRS 4.5 Component Installer
- Determine whether scanner is a Panasonic KV-S1027C or a Panasonic KV-S1027C MK2
- Determine whether scanner is a Panasonic KV-S1057C or a Panasonic KV-S1057C MK2
- Device Busy Error 9081 when loading a Kodak scan source in VCDemo
- Emulation Mode Support
- Error 20459 Detected page length is too long when scanning with a Canon DR-X10c with Continuous Scanning enabled
- Fujitsu fi-6000ZLA series Compatibility
- Fujitsu OEM Software VRS 4.5.1 Bundle Scanner Model Support
- Fujitsu OEM VRS 5.1 Professional Bundle Scanner Model Support
- Fujitsu PFU OEM VRS 4.5 bundle Scanner Model Support
- Kodak i5650 displays Buffer error on the screen when scanning
- Kodak Scanners that Support Image Addressing
- Multifeed Settings for Fujitsu fi-5950 Scanners
- Scanner models no longer supported in Kofax VRS 5.1.1
- Scanner not responding check card power and cable Error 20125 when loading a Kofax VRS 4.5 scan source
- Skimmer Out of Service Error 360 when scanning with a BOWE BELL and HOWELL Ngenuity 9000 series scanner
- Toggle Patch setting in the Kodak i5200 ISIS driver is not saved in a Kofax VRS profile
- Trouble registering a Xerox W130
- Scanner Page Sensor Error when scanning documents that have one or more punch holes in landscape mode using the BOWE BELL and HOWELL Ngenuity 9150 scanner with VRS 4.5
- Scanner Configuration
- 9081 error reserving Scanner
- Add a non-certified scanner as a Compatible VRS scan source
- Add a TWAIN driver as a Compatible scan source in Kofax VRS 4.x when the scanner is certified with the ISIS driver
- Cannot initialize accelerator card to scanner error when scanning in a third-party scanning application using Kofax VRS 5.1
- Canon DR-X10C Scan Sources
- Certified Scanner Model not listed in Scanner List in OEM Version of VRS
- Certified scanner model not listed in the Kofax VRS 5.1.1 Scanner Configuration screen
- Certified scanner model not listed in the Kofax VRS 5.1.2 Scanner Configuration screen
- Certified scanner model not listed in the Kofax VRS 5.1 Scanner Configuration screen
- Certified scanner model not listed in the Kofax VRS 5.2 Scanner Configuration screen
- Color and Grayscale TIFF files saved with different compression formats when scanning with VRS 4.5
- Compressor failed Error 20208 when scanning in VCDemo
- File Import Source Configuration in VRS 4.5 SCU
- Fujitsu fi-5900C Scan Sources
- Fujitsu fi-5950 Scan Sources
- Fujitsu fi-6670A Scan Sources
- Fujitsu fi-6770A Scan Sources
- Fujitsu fi-6800 Scan Sources
- How to configure new Fujitsu fi-7600
- Kofax Capture Scan module will not open after installing an OEM version of Kofax VRS 5.x
- No such resource Error 20184 when loading a VRS 4.5 scan source
- No Such Resource Error 20184 when selecting a Kofax VRS 4.x scan source in VCDemo or the Kofax Capture Scan module
- Ordinal 113 could not be located in pixmdln.dll error when opening the Scanner Configuration screen in VRS Administration Console
- Reset VRS and scanner driver default settings in VRS 4.5
- Reset VRS Default Settings in Kofax VRS 5.x
- SC007 Unable to make file copy when clicking Restore VRS Defaults
- Twunk_16.exe incompatibility error when attempting to launch the Kofax VRS 4.5 Scanner Configuration Utility on a Windows 2008 server
- Windows Photo Viewer Cannot Open Color and Grayscale TIFF Images Exported from Kofax Capture
- Scan Settings
- Bad Parameter Error 20023 when scanning with a Canon DR-6010C and Kofax VRS 4.5
- Color format not supported Error 20222 when scanning in black and white mode with VRS 4.5
- Enable Long Document Scanning when using a BOWE BELL and HOWELL Spectrum 8000 series or Fujitsu fi-4860c or fi-4990c scanner with VRS 4.x
- Highest scanner resolution DPI supported by Kofax VRS
- Invalid Storage Format Image Combination Error 20157 when scanning
- Server-Client
- Configure VRS Client to Download Shared Profiles from subfolder on the Server
- Convert Standalone VRS on a KFS Scan Station into a Client to pull Licensing from Capture license server
- Convert Standalone VRS on a KTA Scan Station into a Client to pull Licensing from KTA license server
- Install a New Kofax VRS Elite 5.0 - 5.1.1 Server Configuration
- Install a New Kofax VRS Elite Client Configuration
- Install Kofax VRS 5.1 or 5.1.1 Elite Server Client so it uses VRS licensing from KTA license and Shared Kofax VRS Profiles
- Install VRS 5.1.2 or 5.2 as a Server Installation
- Kofax VRS Client or Server and Kofax Capture cannot be installed on the same computer
- License Failover Support in VRS Server Client
- Migrate Shared Profiles and AutoProfile Data to New VRS Server
- Point Existing VRS Client to Another VRS Server
- Silently Install VRS 5.x as a Client Installation
- Silently Install VRS 5.x as a Server Installation
- Silently Install VRS 5.x as a Server Installation to a Custom Location
- Upgrade a VRS 5.x client installation using the VRS 5.1.2 installer without having to upgrade the server installation
- Upgrade a VRS 5.x client to 5.1.2 without affecting the connection to the server
- Upgrade a VRS Client from 5.1 to 5.1.1 without upgrading the VRS Server
- VRS Features
- Articles pertaining to the VRS Feature Set: Auto Deskew, Auto Crop, Edge Cleanup, Edge Fill, Hole Fill, Auto Rotate, Merge Sides, Blank Page Detection / Deletion, Auto Brightness, Auto Contrast, Intelligent Cleanup, Line Weight, Speckle Filter, Halftone, Automatic Color Detection, and Background Smoothing.
- Auto Color Detection toggle between color and grayscale output formats
- Auto Rotate Chooses Wrong Orientation when Text on Page in Multiple Directions
- Best Practices for Enabling Image Processing Features Duplicated Between Scanner Driver VRS and Kofax Capture Permanent Image Cleanup
- Blank Page Deletion removing pages containing light gray text
- Blank Page not deleted when scanning a Single Page in Duplex Mode with Blank Page Deletion enabled
- Change cropping algorithm from black background cropping to white background cropping in VRS 4.x
- Edge Fill becomes Disabled when Scanning with White-background Scanner
- Expected behavior when both Edge-based and Content-based Auto Deskew are enabled at the same time
- Features included in the Kofax VRS 5.1.x Elite and Kofax VRS 5.1.x OEM Basic versions
- Features included in the Kofax VRS 5.x Elite and Kofax VRS 5.x OEM Basic versions
- Features included in the Kofax VRS 5.x Elite and Kofax VRS 5.x OEM Professional versions
- Images shift within the image file when scanning with VRS 4.x
- Maximum angle of image skew that the Kofax VRS Deskew feature will correct
- Mimimum number of non-ambiguous characters necessary in an image for Auto Rotate to detect the correct orientation
- Noise Removal Guidelines