Skip to main content
Kofax

How does the Standard Bar Code (SBC) algorithm search engine work?

10933

QAID # 10933 Published

Question / Problem:

How does the Standard Bar Code (SBC) algorithm search engine work?

Answer / Solution:

The Standard Bar Code driver searches for bar codes in a linear fashion, probing the search area for potential bar codes. For horizontal bar codes with an orientation of 0, for example, it works down the image starting on the left edge and probing toward the right edge. For vertical bar codes, it works across the image starting on the top edge and probing top to bottom.

The distance between probes is calculated by dividing the specified bar code height by the specified quality (BarHeight/BarQuality) as follows:

Quality Number of Probes
Good Ensures 1 probe per height of bar code.
Normal Ensures 4 - 5 probes per height of bar code.
Poor Ensures 1 probe for every DPI/50 lines.
 

For example:  

  • 100 DPI image = 1 probe every 2 lines.
  • 200 DPI image = 1 probe every 4 lines.
  • 300 DPI image = 1 probe every 6 lines.

Moreover, when enabled with the selected search direction setting, the bar code driver is capable of reading bar codes that are skewed on either side of the search path. Skew detection is built into the driver and occurs automatically. Each selected direction covers a 90 degree window (45 degrees on either side of the search path).

For example, if the search direction is 90 degrees, bar codes can be read in the range 90 degrees +/- 45 degrees (resulting in a range from 45° to 135°.)

If all search directions are set, the bar code driver can read bar codes oriented from 0 to 360 degrees on the image.

Applies to:

Product  Version  Category 
VRS 4.5 Bar Codes
VRS 5.1 Bar Codes
VRS 5.1.1 Bar Codes
VRS 5.1.2 Bar Codes