Skip to main content
Kofax

Fujitsu fi-6770A Scan Sources

Article # 3033081 - Page views: 353

Issue

Which Fujitsu fi-6770/A scan sources are certified for use with Kofax VRS and how can they be configured?

 

Cause

The Fujitsu fi-6770/A scanner has up to two USB ports and up to three drivers that are certified for use with Kofax VRS 5.x.  Matching the correct USB port to the correct driver and scan source are critical for properly configuring the scanner for use with Kofax VRS.

fi-6770A.jpg

 

Solution

Native Port

On the back of the scanner, under the third party card slot, is the fi-6770/A scanner's native USB port.  Scanners sold as the fi-6670 only have this single USB port.  When the scanner is connected using its Native USB port, the Hardware VRS board is not utilized and Windows Device Manager recognizes the scanner as Fujitsu fi-6770dj

  • If the Legacy ISIS driver is installed, the Fujitsu fi-6770 scan source should be selected as the Default scan source in the Kofax VRS Administration Console's Scanner Configuration screen. 
  • If the PaperStreamIP (ISIS) driver is installed the Fujitsu fi-6770 PaperStream_IP scan source should be selected as the Default scan source.
product_documentation_-_user_guides_Important-Icon.png

The Fujitsu fi-6770 PaperStream_IP scan source does not qualify for Fujitsu OEM VRS 5.x Professional licensing.  When using the fi-6770/A scanner with a Fujitsu OEM version of VRS, use either the fi-6770A or fi-6770 scan source to qualify for Fujitsu OEM VRS 5.x licensing.

 

Hardware VRS (HVRS) Port

Above the native port, the fi-6770/A scanner has a third-party card slot.  Scanners sold as the fi-6770A have a Hardware VRS board (also known as an HVRS or CGA board) installed in the third-party card slot.  When the scanner is connected using the USB port on HVRS board, Windows Device Manager will recognize the scanner as aKofax Fujitsu USB Device and the Fujitsu fi-6770A scan source should be set as the Default scan source in the Kofax VRS Administration Console's Scanner Configuration screen.  The Hardware VRS port uses proprietary drivers that are installed automatically by the Kofax VRS installer.

 

Certified Scan Source USB Port Device Manager Driver OEM licensing
Fujitsu fi-6770A HVRS (left of power switch) Kofax Fujitsu USB Device HVRS Driver (installed with Kofax VRS) YES
Fujitsu fi-6770 Native (lower right below fan) Fujitsu fi-6770dj Legacy ISIS YES
Fujitsu fi-6770 PaperStream_IP Native (lower right below fan) Fujitsu fi-6770dj PaperStreamIP (ISIS) NO

 

 

Level of Complexity 

Moderate

 

Applies to  

Product Version Build Environment Hardware
Kofax VRS 5.2
5.1.2
5.1.1
5.1
ALL ALL Fujitsu fi-6770A
Fujitsu fi-6770
Fujitsu OEM VRS 5.1 5.1.0.0.0.265 ALL Fujitsu fi-6770A
Fujitsu fi-6670

References

N/A

 

Article # 3033081
  • Was this article helpful?