Skip to main content
Kofax

ISIS Scanner Driver Test Program - TestAppn

Article # 3032589 - Page views: 368

Issue

Is there a test program/utility that I can use to verify that a scanner is working properly using the scanner's ISIS drivers?

Solution

Yes. There is a program named “TESTAPPN.EXE" which can be used to verify that the scanner is working properly using the scanner's ISIS drivers.

  1. Navigate to C:\Windows\PIXTRAN
  2. Run TESTAPPN.exe
  3. In the Scanner Selection window, highlight the scanner (make sure that it is the exact name of the scanner).
  4. Click on the OK button.
  5. In the Test APP-scanner_name window, click on the Scan Page button.
  6. A page will be fed through the scanner and a dialog box will display “Success!” NOTE: This program does not display the scanned image.

**Note -  This program cannot be used with VRS Hardware scanners, or with the Kofax Adrenaline 850 or 1700 boards.

Level of Complexity 

Easy

 

Applies to  

Product Version Build Environment Hardware
VRS 5.2
5.1.2
5.1.1
5.1
  All ISIS Drivers

References

N/A

 

Article # 3032589
  • Was this article helpful?